Southern Arizona Rain Gutters
Fascia Wraps
Here in the desert, we get a lot of sun that dries out and kills fascia boards.
Fascia wrap covers the fascia to protect the wood and hide any imperfections, such as peeling paint. It makes your board last much much longer without any maintenance. If you have fascia wood that's on an east or west side exposure, it can be protected against sun damage with either gutters or fascia wrap. Gutters will protect about 60% of the wood; but in some cases fascia wrap has been installed and then a gutter system installed over the wrap.
We can match the color of your fascia and the wrap will never fade or rust. It's also paintable. It also prevents water damage during the monsoon season, when humidity causes mold that rots wood. Fascia wrap does not allow moisture to penetrate the wood.
It's made out of aluminum; the paint is a chemically bonded finish with a 50 to 100 year warranty. It's the highest quality you can find in Arizona and we'll do the best job installing it. If there's a part of your fascia board that is too damaged, we will refer a professional to replace those sections. Normally when there's a little bit of wood rot or minor damage, it's fine to cover the fascia with aluminum wrap.
We measure everything, and install the wrap in ten to twelve foot sections. We'll make sure the wrap goes underneath the drip edge an inch to an inch and a half and that everything overlaps, so no water can get inside the wrap. It will match your fascia, and each section is installed with three screws on the bottom so it's very low-profile.
Fascia Wraps
Fascia wrap and trim are constructed of an aluminum material to cover and protect the wood from future water damage. For a professional look, and extra protection to your structure, we can custom bend around fascia, rake board, and windows.
Fascia wraps will extend the life of your wood fascia and it will match the look and color or your roof.