Canalones pluviales del sur de Arizona
Metal Water Tanks
SARG is proud to offer a wide variety of the highest quality corrugated metal water tanks for rainwater harvesting, and install them on site. Sizes vary based on volume and space constraints.
Corrugated steel water tanks are designed to be an aesthetically pleasing and durable water storage solution that can help you enjoy the benefits of rainwater harvesting. Corrugated steel has nine (9) times the tensile strength of flat steel and is superior in resistance to compressive loads. These tanks are for above-ground rainwater harvesting and storage capacity ranges from 800 to 20,000+ gallons. Metal water tanks are a good rainwater harvesting systems for both residential and commercial applications.
Metal Water Tanks
With steel culvert cisterns, the rainwater runs off your roof, down through your rain gutter system, either through an a top feed or wet feed system. The water rises until it reaches the top of the overflow pipe, located in the middle of the cistern.
Once the tank is full, the extra water flows into the overflow pipe and out to a designated area on your property. To clean the tank you simply open the clean out valve and drain the tank. Once the tank is drained you can use a hose to spray out the inside of the tank and wash out any debris or sediment that has collected. Close the valve and the cistern is ready to collect more water. To utilize the water that is in the tank you simply connect a garden hose to the output hose bib just as you would to an outside faucet.
EN 
